Aftercare Guide

Wrap Aftercare Guide

After we install your wrap, taking proper care in the early days (and ongoing) is *super* important. Doing things right ensures the wrap looks awesome and lasts long without peeling, bubbling, or fading. Below’s how to treat your new wrap like royalty. 👑

Surface Prep Before Wrapping

  • We clean and prep the whole car exterior before applying the wrap.
  • If wax is present, we remove it — wax acts like a hard barrier, preventing the wrap’s adhesive from bonding properly.
  • For wax removal, there is a $65 fee to ensure the surface is fully clean and ready. See More

First Days / Curing Period

  • Let the wrap cure for a minimum of 72 hours (3 days) before washing. In colder or humid weather, wait up to 5-7 days. See More
  • Don’t wash or expose to heavy rain until edges are fully set. Moisture trapped early can cause lifting or edge failures. See More
  • If you see some haziness, bubbles, or small edge waviness, that’s often normal early on — it should settle as the wrap fully adheres. See More

Regular Wash Guidelines

  • After the curing period, wash by hand using the two-bucket method: one bucket with mild, pH–neutral soap, one with clean water to rinse. See More
  • Always start top of vehicle and work your way down. Gravity’s your friend. See More
  • Use soft microfiber cloths or wash mitts; avoid brushes, rough sponges or anything abrasive. See More
  • Rinse thoroughly after washing to remove all soap or detergent residue. Dry with micro-fiber towels or a squeegee to avoid water-spots. See More

What to Avoid

  • Do not apply any soap, detergents, wax, or products to the vinyl in the first few days while curing. See More
  • Avoid automatic car washes, especially ones with brushes; they may scratch or lift edges of wrap. See More
  • Be cautious with pressure washers: if used, keep pressure < ~2,000 PSI, nozzle wide-spray, nozzle held far (1 foot / 30cm) from wrap, and avoid spraying edges directly or at angles. See More
  • Do not use waxes or traditional polishing compounds intended for paint; wax or gloss agents may degrade the wrap, cause uneven color, reduce life. See More

Spot Cleaning & Tough Stains

  • If you get bird droppings, bug splatter, tree sap, fuel spills, etc., clean them immediately. These contaminants are acidic and may damage vinyl if left too long. See More
  • Soften with warm, soapy water first, let sit briefly, then gently wipe with clean microfiber cloth. Rinse & dry. See More
  • For stubborn spots, a mild product like isopropyl alcohol mixed (e.g. 2:1 water to alcohol) may be okay – always test on a hidden area first. See More

Long-Term Care & Protection

  • Wash regularly — depending on exposure (weather, road grime, etc.), once every 1-2 weeks is common. For infrequent use, every 2-3 weeks might suffice. See More
  • Store or park in shade or covered area when possible to avoid UV fade, heat damage, and prolonged exposure. See More
  • If using any protection/sealant, only use ones made *for vinyl wraps*. Do NOT use wax meant for painted surfaces or polishing agents not intended for vinyl. See More

Why All This Matters

Improper care during the curing period or using harsh cleaning tools/products can cause premature peeling, bubbling, lifting at edges, discoloration, or reduced lifespan of your wrap. If you treat it well, the wrap will look sharp and last far longer — saving you money and headaches! 😊

The links provided above are the sources from which we gathered information. To the best of our knowledge, the validity of these first- and third-party links is correct.